Hot water heaters are one of a property’s toughest functioning appliances. Day or evening, it’s creating completely heated water whenever you desire it. So when it unexpectedly is no longer working effectively, many of us have the tendency to worry.
Luckily a nonfunctioning water heater does not always imply a costly repair work. Before making an emergency call to Haynes Plumbing, we recommend inspecting the issue yourself first.
Bowie Water Heater Repair Troubleshooting
For gas water heaters first eliminate the small panel which is situated on the bottom of the system and look to see if the pilot light is illuminated.
See if will relight when it is not ignited. If it stays lit, one should be able to listen that the water heater should begin functioning effectively once again. The pilot light might need cleaned or the thermocouple could need replaced whenever the pilot light will not continue being lit.
The name thermocouple may sound like a incredibly technical name, however it’s an element on ones water heater that can easily be replaced. Haynes Plumbing would recommend having us complete the replacement but the techniques here are for educational objectives.
Check the owner’s guide. It must have information for the best ways to eliminate and replace the thermocouple.
Turn off the gas prior to taking out anything at all from the water heater.
Following the instructions in your individual’s manual, eliminate the thermocouple by removing it from both sides of the pilot light. The new thermocouple on the water heater should be cut to the correct length.
The gas may then be turned back on and test for leakages, then the pilot light can be lighted once more.
Press the Water Heater Reset Button
For homeowners with an electric water heater, look for the position of the reset button and press it until a click is noticed.
If a click is possibly not noticed, or it falls short to restart the water heater, reset the breaker.
If a breaker reset does not suffice, the thermostat probably will require being replaced.
Both the power to the water heater and the power switch on the breaker will need to be switched off. Basic safety with electricity has to be observed!
Use the owner’s handbook to find the thermostat wires, then detach them.
Following removing the thermostat we will test to learn its problem. If it is malfunctioning, we will have to change it.
Heating Element Replacement
With the power still off, the access panel on the water heater may be opened up.
The terminal screws can be loosened and the wires can be pulled far from the heating element.
We’d next test each individual component of the element to check if they are damaged, and replace them as required.
These water heater troubleshooting measures should help get ones heater up and running once more. Haynes Plumbing is obviously here for helping, therefore don’t be reluctant to get in touch with us today for any Water Heater Repair Bowie help.